Composition of On gird solar system

Nov 20, 2023 Leave a message

Emma Zhang
Emma Zhang
Serving as the International Sales Manager at Mutian Solar Energy Scientech Co., Ltd, I have been instrumental in expanding our global presence across 46 countries. My expertise lies in understanding market trends and delivering tailored solar lighting solutions to meet diverse customer needs.

An on-grid solar power system is frequently simplified as "inverter and panels," but in reality, a grid-tied solar plant consists of an integrated group of components. Each component operates based on its own technical principles, leads to various failures, and incurs different costs. In order to understand the various elements involved in commercial and large-scale photovoltaic installations, it is necessary for any specialists engaged in creating or fixing solar power stations to be familiar with how the systems operate.

The visible starting point is the PV array. Modules are electrically configured into strings, and the array's orientation, tilt, and string layout are determined by site geometry and irradiance profile. The array is not merely a collection of panels; it is an electrical architecture. String length, voltage window, and parallel grouping constrain what downstream equipment can accept. Poorly planned string design can reduce inverter efficiency, complicate maintenance, and limit future expansion.

The inverter is the system's central active component, converting DC to AC and synchronizing with the grid. Composition here is not uniform. Central inverters, historically dominant at utility scale, aggregate large DC blocks and can reach capacities up to 5 MWp in master–slave configurations. String inverters, typically up to about 150 kWp, distribute conversion across smaller blocks. The compositional consequence is fault behavior: a central inverter failure removes a large fraction of plant output, whereas a string inverter failure affects only its attached arrays. String architectures also provide more granular maximum power point tracking, which matters on sites with non-uniform shading or mixed orientations.

Mounting structures define how the array interfaces with the physical site. Flat commercial roofs typically use ballasted systems, which avoid penetrations but add 35–50 kg/m² of load, or penetrating systems, which reduce added load to 12–18 kg/m² but require waterproofed fixings. Ground-mounted arrays may be fixed-tilt or equipped with single-axis trackers that rotate east–west to follow the sun. The mounting choice is therefore both structural and energetic: it determines roof loading, installation sequence, and the array's irradiance capture profile.

The rest of the system is composed of the balance of the system (BOS) - combining boxes, cables, electrical equipment, switches, fuses and devices for voltage spike protection. In smaller systems BOS represents up to a half of the entire cost and majority of the maintenance costs making its relatively cheap components important economically speaking. The DC combining box illustrates this as it connects several strings at once and has the necessary overloading protection system providing the overcurrent current 1.56 times higher than the circuit shorting current. In addition to monitoring devices, there are also data collection devices, which collect data from the inverters and meters for the needs of the analysis and remote diagnostics.

What ultimately distinguishes an on-grid system is not the absence of batteries but the presence of a grid-interactive inverter. Modern grid-tie inverters are expected to provide reactive power support, voltage and frequency ride-through, and fault ride-through-functions that place the inverter in a regulatory and power-systems role, not merely an energy-conversion role. The composition of an on-grid system, in other words, is held together by the grid itself: the array generates, the BOS protects and routes, the mounting situates, and the inverter negotiates the boundary between the DC array and the AC network.