Professional Lithium Battery 25.6V 100Ah

Hebei Mutian Solar Energy Technology Development Co., Ltd. is one of the most reliable manufacturers and suppliers of professional lithium battery 25.6v 100ah in China, also supports customized service. Welcome to buy advanced professional lithium battery 25.6v 100ah in stock from our factory.

This 2.56kWh LiFePO4 battery pack is designed for residential and light commercial applications. This product has been made with only the best quality 'Grade-A' (LFP) LiFePO4 cells and can provide an incredible 8,000 cycles (80% DOD) or more than 10 years of use on a daily basis. The state-of-the-art 8S120A Integrated Intelligent Battery Management System (BMS) provides total protection against over voltage, under voltage, overload, short circuit and thermal runaway.

Bluetooth & Wi-Fi Enabled Intelligent Battery Management System – Real-time battery monitoring of voltage, current, temperature, state of charge, and state of health via embedded APP (iOS/Android). Remote firmware upgradable.

High Continuous Load Capability of 120A (Continuous) – Can operate heavy load appliances and have a high surge-starting power.

Large Number of Charge Cycles – 8,000 charge/discharge cycles at 80% Depth of Discharge – Approximately Two (2) Times the Load Cycle Life of Typical Lead-Acid Batteries, Providing 10+ Years of Daily Cycling Use.

Wide Range of Operating Temperatures – Temperature Range of -20 degrees Celsius to +60 degrees Celsius, with built-in thermal overload & heating pad (ideal for use in colder climates).

Communication/Plug and Play – RS232/RS485/CAN communication ports, and compatible with major manufacturers' inverters (Victron, Growatt, GoodWe, SMA, Deye, etc.).

No Maintenance Required – No Acid Spills from sealed cases; No need for water refills; No Gases Emitted from unit.

Packaging dimensions: 570×470×250 mm (strong corrugated carton with internal foam padding and plywood reinforcement for sea freight).

Gross weight: 39 kg – packed with pallet‑ready bottom for forklift handling.

Shipping methods: Air (limited quantity), Sea (standard), or Express (DHL/FedEx/UPS) – shipping method options with UN38.3 certification.

Q: Can this professional lithium battery 25.6V 100Ah be connected in series or parallel?
A: Yes, you can connect a maximum of 15 battery units to expand your system by connecting them in parallel; however, you cannot connect them in series. If your system is 48V, use our products specifically designed for that voltage (48V product series).
Q: Which inverters are compatible?
A: All major manufacturers that utilize CAN and/or RS485 communication protocols are compatible with our products. We have protocol files for Victron, Growatt, Deye, GoodWe, SMA and many other brands. Contact us for a full list of supported manufacturers' protocol files.
Q: How long does it take to fully charge?
A: Charging from 20% to 80% will take about 50 minutes at 120A of charging current and recharging from empty will take approximately 1.5 hours using 500W solar panel in approximately 6 hours of full sunlight on the solar panels.
Q: Is the BMS user‑adjustable?
A: Yes, you can adjust any charge/discharge cutoff voltages as well as current limits and temperature thresholds from either the APP or our PC software. Password protection will limit access to both.
Q: Does it come with a wall bracket?
A: The bracket has been factory pre-attached to the battery. Only four expansion bolts are needed to attach the battery bracket to a wall or floor (and are included).
Q: How do I monitor the battery remotely?
A: The built‑in Bluetooth & Wi‑Fi module connects to our free APP. You can check real‑time data and receive alert notifications.
Q: What is the difference between 25.6V and 24V systems?
A: 25.6V is the nominal voltage of an 8‑cell LiFePO₄ string (3.2V×8). It is fully compatible with standard 24V inverters (which have a working range of 20~30V).