10KWh Wall Mount LiFePO₄ Battery

Hebei Mutian Solar Energy Technology Development Co., Ltd. is one of the most reliable manufacturers and suppliers of 10kwh wall mount lifepo₄ battery in China, also supports customized service. Welcome to buy advanced 10kwh wall mount lifepo₄ battery in stock from our factory.

Massive 10.24KWh Capacity – The capacity of 10.24KWh is massive and allows for whole home backups, off grid living, or large scale solar self-consumption. It is capable of powering any high usage devices you may have such as: air conditioning, water heater or electric vehicle chargers.

High‑150A of continuous output means that this system can support instantaneous surge loads of up to 300A (when used for less than 3 seconds) and will perform very well under these types of loads, such as when starting heavy machinery or motors.

16S Premium BMS – With a 16 cell series configuration and a BMS rated for 150A, each cell can be balanced to perfection. The active balancing feature that is built into the BMS will ultimately increase the lifespan of the entire battery pack.

Exceptional 8000‑Cycle Lifespan – The 8000 cycle lifespan will allow you to operate your battery system daily at an average of 80% depth of discharge for over 10 years, providing you with far greater value than traditional lead-acid batteries.

Smart Bluetooth & Wi‑Fi Monitoring – The built in appliance for monitoring the current state of charge, state of health, voltage, current, temperature along with historical data through a Bluetooth and Wi-Fi app will allow you to monitor your entire battery system and update the firmware remotely.

Universal Inverter Compatibility – This system is compatible with all inverter systems that utilize the RS232, RS485 and CAN communication standards. The communication protocols for the manufacturers listed are pre-loaded on the system.

Wide Temperature Tolerance – This battery can operate in temperatures as low as -20 degrees Celsius and as high as +60 degrees Celsius, and the unit has built in over-temperature protection and an optional self-heating feature for installations in extremely cold climates.

Space‑Saving Slim Design – Only 160mm thick, fits neatly against any wall; pre‑drilled heavy‑duty brackets support the 75kg weight securely.

Packaged dimensions: 795 x 495 x 360 mm (heavy-duty double-corrugated box with high density foam cushioning, reinforced plywood corner supports for international shipping)

Packaged gross weight: 89 kg with reinforced wood pallet for safe handling by forklift.

Shipping methods: Ocean freight (preferred method for economical), Air freight (limited volume), or Express ship (DHL/FedEx/UPS) – All shipping options meet the requirements of the UN38.3.

Included documents: MSDS, UN38.3 testing report, CE declaration, Transport Certificate for Dangerous Goods (ocean/air), commercial invoice, packing list.

Established Experience: Lithium Iron Phosphate (LiFePO₄) batteries manufacturing (30,000 m² automated facility with ISO 8 cleanroom cell production) for over 12 years.

Key Customers: Major Renewable energy integrators (nationwide) have bought from us as well as telecoms/govt. agencies throughout Europe/Australia/ South East Asia/ Middle East/ North America (see customer logos/case studies available).

Certifications:

ISO9001 / ISO14001 / ISO45001 (Quality, Environment, Occupational Health)

CE, RoHS, REACH (EU market compliance)

UN38.3, MSDS, IEC62619, and UL1973 (in progress)

Research & Development (R&D) Resources: 30 dedicated engineers performing R&D for the Battery Management System (BMS) algorithms & thermal simulation & custom protocol development.

Production Features: 100% automated cell evaluation/matching; robotics for laser welding; 100% burn-in before AND after 72 hours of actual use; full QC inspection before shipment.

Q: Can this battery be connected in parallel?
A: Yes. It supports parallel connection of up to 15 units (total 153.6KWh). Series connection is not supported. For 96V systems, please contact us for custom solutions.
Q: What is the warranty period?
A: Standard 5-year warranty against manufacturer defects (10,000 cycles maximum) with extended warranty options available.
Q: How long does it take to fully charge?
A: At 150A charge current (~1.3 hours, 20% to 100% SOC), expect to charge using a solar array (minimum 2000W) for approximately 5–6 hours during full sunlight.
Q: Is the BMS user‑adjustable?
A: Yes, via the APP or PC software you can adjust charge/discharge cut‑off voltages, current limits, and temperature thresholds (password‑protected to prevent accidental changes).
Q: Does it come with the wall bracket?
A: Yes, the heavy‑duty steel bracket is pre‑attached. All mounting bolts and expansion anchors are included.
Q: How do I monitor the battery remotely?
A: Utilising the built in BT/WiFi device to connect to our FREE app to access real-time data, setup alerts and produce performance reports from anywhere in the world.
Q: Can I use this with my existing 48V inverter?
A: Yes, the nominal voltage of a 16 cell LFP string is 51.2V. It is fully compatible with all standard 48V inverter operation (40~60V typical range).
Q: Is it safe to mount indoors?
A: Yes, they are rated to IP54 for dust and splash proofing. No Hazardous Gas Emissions and very little heat generated; ambient conditions outside must remain below 45ºC while providing good ventilation when enclosed in a small space.
Q: What shipping documents are required?

A: We can provide you with UN38.3, MSDS, CE, and Maritime Dangerous Goods; any additional customs clearance documents will be available upon request.

Hot Tags: 10kwh wall mount lifepo₄ battery, China 10kwh wall mount lifepo₄ battery manufacturers, suppliers, factory