All in One Solar Panel Power System

One less thing to clutter your roof: Our system bundles together all the essential components (solar panels, hybrid inverter, lithium battery, MPPT Controller, and Smart Hub) into one complete unit that can be mounted on either a wall or a pole. The unit is approximately 1.2m x 0.8m x 0.4m (for the 5KW model), so you can use it on balconies, small roofs or even back yard poles where space is limited (like apartment buildings, tiny homes & urban gardens). By having this single unit you no longer have to allocate 10+ sq.m.for separate components, so you can use your roof for other things.

The central part of the system is a Smart Energy Controller that uses machine learning to understand your energy consumption pattern, local weather forecasts, and your electricity grid rates (if connected). The Smart Energy Controller controls and optimises the flow of energy as follows:

It stores excess energy created by solar during peak sun hours in the battery.

It automatically switches between solar, battery or grid (or generator) when there is a demand for the particular item.

When your device detects that there has been a large increase in energy consumption (such as with heaters being used), the AI optimization will send an alert through a mobile application showing exactly what adjustments are necessary.

The AI optimization increases the self-consumption by twenty percent when compared to non-smart systems and significantly decreases the dependency on expensive grid power.

You don't have to hire a crew of electrical contractors. Our All in One unit is ready to install because it is pre-assembled, pre-wired, and pre-tested.

Mounting the unit (wall/pole brackets included).

Connecting to your home's electrical panel via a single AC cable.

Pairing with the SolarSync App​ (iOS/Android) to activate.

The unit was designed specifically to withstand harsh weather conditions; therefore, it has an IP67 waterproof rating which means it is 100% waterproof from rain/snow/gusts of wind, and it is submerged 1 meter deep for 30 minutes without any damage possible to any part of the unit.

The enclosure of the unit made from Marine Grade Aluminum Alloy is coated in a developed UV resistant powder coating that is also resistant to corrosion and will not fade or deteriorate due to being exposed to direct sunlight for long periods of time.

This unit is not only designed with the harshest of conditions in mind and can operate at temperatures of between -30°C and +60°C (-22°F and +140°F), making it the perfect unit for use in extremely remote deserts, on mountain tops, along coasts, or anywhere else with extreme temperature variances.